Accessories
Let The Spraying Bull help keep you equipped for all those spraying and watering jobs.
-
Steel/Poly Spray Lance
CCDPLANCE
Really good solid spray lances.
Return to accessories page to choose a nozzle pack and a hose tail to complete the job.
Weight for delivery calculation: 100g.
-
Hose Tail
HTAIL
Nylon Hose tail to go with our Poly lances. They have a 1/2" male thread and a choice of 3/8" or 1/2" hose tail. Seal with ptfe tape or other sealant and attach to hose using the appropriate worm drive clip.
-
Roll of PTFE tape
PTFE
Standard roll of PTFE tape to be used for sealing the threaded hose tail to our spray guns.
-
Hose Clamp
VIPERTS12-20
We are told this is the best hose clamp for horticultural hose. Availble for our 1/2", 3/4" and 1" hoses. Choose above.
MIKALOR W3 stainless steel worm drive hose clamps are of high quality stainless steel and have a smooth underside to prevent tearing of the hose surface.
Don't believe us? - see the MIKALOR video below
-
Telescopic Basket Watering Lance
CCTEL
The industry standard GEKA telescopic watering lance. 145-225 cms with 135 degree head as shown.
Comes with GEKA fitting and rose watering head. Purchase a GEKA male hose tail to suit your hose size.
Due to its length the carriage on this item will come out at £12.00.
-
Flat Fan 110 Pack of 4
CCNPFF110
A flat fan nozzle is typically within a boom set as the deposition is less at each end of the spray pattern allowing for crossover with an even spread. Also commonly used for general sparring in a single lance application. If you are spraying in bands and want an even distribution you should consider an Even Fan.
This pack contains:
1 x 110degree standard flat fan orange 0.4l/m @ 3 Bar
1 x 110degree standard flat fan yellow 0.8l/m @ 3 Bar
1 x 110degree standard flat fan blue 1.2l/m @ 3 Bar
1 x 110degree standard flat fan red 1.6l/m @ 3 Bar
One pack should cost £2.50 p&p.
-
Flat Fan 80 Pack of 4
CCNPFF80
A flat fan nozzle is typically within a boom set as the deposition is less at each end of the spray pattern allowing for crossover with an even spread. Also commonly used for general sparring in a single lance application. If you are spraying in bands and want an even distribution you should consider an Even Fan.
This pack contains:
1 x 80degree standard flat fan orange 0.4l/m @ 3 Bar
1 x 80degree standard flat fan yellow 0.8l/m @ 3 Bar
1 x 80degree standard flat fan blue 1.2l/m @ 3 Bar
1 x 80degree standard flat fan red 1.6l/m @ 3 Bar
One pack should cost £2.50 p&p.
-
Even Fan 80 Pack of 4
EVEN-FAN-80-PACK-4
Unlike a flat fan, an even fan will give an even distribution across the spray width, making it suitable for band spraying.
This pack contains:
1 x 80degree even fan green 0.6l/m @ 3 Bar
1 x 80degree even fan yellow 0.8l/m @ 3 Bar
1 x 80degree even fan blue 1.2l/m @ 3 Bar
1 x 80degree even fan fan red 1.6l/m @ 3 Bar
One pack should cost £2.50 p&p.
-
Hollow Cone 80 Pack of 4
CCNPHC80
A hollow cone nozzle will give a fine, swirling spray patten with a hole in the middle making it ideal for penetrating deep within plant foliage and giving good leaf coverage.
This pack contains:
1 x 80degree hollow cone orange 0.4l/m @ 3 Bar
1 x 80degree hollow cone green 0.6l/m @ 3 Bar
1 x 80degree hollow cone yellow 0.8l/m @ 3 Bar
1 x 80degree hollow cone fbrown 1.2l/m @ 3 Bar
One pack should cost £2.50 p&p.
-
Deflector Pack of 4
CCNPDEF
A deflector nozzle is generally used for the application of herbicides as it gives a good spray pattern at low pressures to avoid drift. Generally used for band spraying.
Many people will be used to the "polijet" colours which give a different spray width, but the same overall application rate. These are the deflector equivalents.
Each pack contains:
Lilac (yellow equivalent) giving a 0.5m spray width
Brown (green equivalent) giving a 1m spray width
White (blue equivalent) giving a 1.5m spray width
Burgundy (red equivalent) giving a 2m spray width
One pack should cost £2.50 p&p.
-
Adjustable Tip Pack of 1
CCNPAT1
This adjustable tip will fit most caps and adjusts from a fine mist to a pencil thin stream
One pack should cost £2.50 p&p.